Spearhead Trident 4000, Руководство пользователя

Страница: 8 / 25

Spearhead Trident
4000/5000/6000
8

Use warning signs to alert others to the type of machine working in the
vicinity. Signs should be placed at both ends of the work site and
should be in accordance with the Department of Transport
recommendations.

Ensure flails are of the type recommended by the manufacturer are
securely fitted and are undamaged.

Ensure hydraulic pipes are correctly routed to avoid damage from
chafing, stretching, pinching and kinking.

Disengage the machine, stop the engine and remove the key before
leaving the tractor cab for any reason.

Clean up any debris left at the work site.

Ensure that when you remove the machine from the tractor it is
secured in a safe position using the parking stand provided.
NEVER

Never operate the machine with other people present, as it is possible
for debris, including stones, to be discharged from the front and rear of
the flail body.

Never operate the machine until you have read and understood the
relevant Handbook and are familiar with the controls.

Never use a machine that is poorly maintained or has guards that are
damaged or missing.

Never allow an inexperienced person to operate without supervision.

Never use or fit a machine onto a tractor if it does not meet the
manufacturer’s specification.

Never use a machine if the hydraulic system shows signs of damage.

Never attempt to detect a hydraulic leak with your hand, use a piece of
card.

Never allow children to play on or around the machine at any time.

Never attempt any maintenance or adjustment without first disengaging
the PTO, lowering the flail bodies to the ground, stopping the tractor
engine and applying the tractor parking brake.

Never leave the cab without removing the ignition key.

Never operate the tractor or any controls from any position other than
from the driving seat.

Never stop the engine with the PTO engaged.

Never operate with flails missing.

Never operate the PTO above the recommended speed, 540RPM.

Never operate with wire around the rotor. Stop immediately.

Never use the flail body at an angle which may throw debris towards
the cab.

Never attempt to use the machine for any purpose other than that it
was designed for.

Never transport with the PTO engaged

Never enter the working area of the machine (risk of injury!).