STARCUT
300
Introduction
The Spearhead Starcut 300 is a very robust high capacity Rotary Cutter that is
easy to operate and maintain, but to ensure trouble-free operation this manual
should be carefully studied.
Safety First
Do not start the machine until you fully understand operation and safety
precaution requirements. Always ensure the operators are proficient with the
operation of this type of this machine.
Tractor Requirements
•
Spearhead strongly recommends 75hp-plus tractor with
CATEGORY 2
rear linkage.
•
Ensure there is sufficient weight on front wheels of the tractor for safe
transport and stability.
•
PTO must be independent live drive to enable continuous PTO drive
even when tractor clutch is pressed down.
•
Before hitching, ensure position control is selected. Do not attempt to
hitch in draft control.
•
Check chains and stabilizers must be in good working order to hold the
machine firmly. Do not operate without checking that chains and
stabilizers are tight.
•
Spearhead particularly recommend ‘turn buckle’ type check chains
•
Set linkage lift rods to an equal length.
7