STARCUT
300
Important
On delivery of your machine check that the dealer has completed the P.D.I.
form ensure the warranty registration form is completed and returned.
Service & Maintenance
Safety First
•
Never leave the tractor seat without first disengaging the PTO and
stopping the engine.
•
Ensure all rotating parts have stopped turning.
•
Never attempt any repairs, maintenance, service or any other checks
with the machine carried on the tractor hydraulics.
•
Always fully lower to the ground, or securely prop the machine on
substantial servicing stands.
•
Always replace all guards and retaining chains after
servicing/maintenance is completed.
It is imperative that the following checks are carried out in order not to
invalidate your warranty; these are carried out
before the first operation,
after the first hour,
then
after 4 hours
. These checks are:
•
Wheel nuts and tyre pressure (50psi)
•
Gearbox bolts are fully tightened
•
Blade bolts are fully tightened and in particular the castle headed nut
on the blade rotor
•
Retaining bolts on the drive shaft
•
Grease all points
•
The gearbox oil level, top up with EP90 Gear oil if required
•
It is your responsibility to maintain, to ensure a long reliable working life
Torque Settings
The Torque figures given below are recommended maximum settings only.
Size:
Tensile strength:
Description:
Torque setting:
Nm
M16
8.8
Gearbox bolts
280
M16
8.8
Blade carriers
280
M20
8.8
Blade bolts
425
M24
8.8
Blade bolts
950
13