Spearhead ROLLICUT 170, Руководство пользователя

Страница: 16 / 30

ROLLICUT 170/230
16
Traveling Between Jobs
1. Disengage PTO drive.
2. Raise mowing body using tractor linkage
3. Turn on headlights and warning lights.
Starting Mowing Job
Engage the PTO only when the tractor engine is at low revs to prevent shock load
damage to machine. Slowly increase the engine revs to achieve the standard 540
RPM PTO speed.
If at any time serious vibration occurs, stop the engine
immediately and check that no blades are missing, (following all safety
precautions). The cause must be found and rectified immediately or other
components may be affected.
When in work, lower the machine to the ground carrying all its weight on the rollers,
allowing the machine to follow the contours of the ground. Select a sensible forward
speed bearing-in-mind the density of growth, the terrain and the available
horsepower, taking extra care when turning, particularly on slopes.
Quality of finish is determined by the forward speed i.e. a slow speed will produce a
high quality of cut, whereas faster forward speeds are used when high output is first
priority.
Finishing Mowing Job
•
Stop tractor in level clear space and apply hand brake
•
Decrease engine revs to idle.
•
Disengage PTO drive
•
Raise deck to transport position.
•
If ‘roading’ machine to new mowing job follow road transport instructions
•
If parking the mower and tractor apply handbrake, stop engine and remove
key.
General Operating Tips
•
Running PTO at speeds over 540rpm the blades over speed causing undue
stress, this can result in blades breaking and coming off causing risk of injury
or death.
•
For best mowing results mow in dry conditions, the finish achieved will vary
with several factors: grass length, terrain, moisture.
•
Depending on conditions ground speed can vary from very slow to 20Kph
depending on ground conditions and terrain.