Spearhead ROLLICUT 170, Руководство пользователя

Страница: 14 / 30

ROLLICUT 170/230
14
Uncoupling The Machine
To uncouple the machine park the machine on level ground either with wings in
transport position or lowered to the ground. If in transport position ensure that the
transport lock are taking the weight of the wings.
Stop the tractor and ensure there is no residual pressure in the hydraulics.
Unplug the lights, hydraulic pipes and remove the transport release rope from cab.
Disconnect the input PTO shaft and place on the PTO stand.
Before Operating Machine
Daily Checks
Daily checks must be carried out before starting work.
•
Check all nuts and bolts are tight
•
Check blades are not broken or bent
•
Ensure all drive shafts are greased.
•
Check that all guards and PTO guards are intact
•
Ensure spindles and roller bearings are greased.
Starting Machine For First Time
Before you start the machine for the first time check that all the spindles move freely
this can be done with the machine in transport position.
To start the machine for the first time choose a space with little grass, then start the
PTO at idle, the tractor may stall if using a small tractor, if this happens the revs may
need to be slightly increased to start the mower.