Spearhead ROLLICUT 170 Скачать руководство пользователя страница 8

Страница: 8 / 30

ROLLICUT 170/230

SAFETY RECOMMENDATIONS

Beware of the following Potential Dangers associated with the use of
this machine

•

Becoming trapped when hitching or unhitching

•

Getting caught on rotating power take off (PTO)

•

Being hit or caught by any moving parts, e.g. belts, pulleys, arms and

cutting body

•

Injection of high pressure oil from damaged couplings or hydraulic

hoses

•

Accidents due to collision with other machines or debris left on road

ALWAYS

•

Ensure the operator has read this handbook and has been trained to

use the machine

•

Ensure all cab safety guards are in place and all tractor windows

closed

•

Before leaving the tractor cab always ensure that all the rotary body are

firmly on the ground, no weight is on the machines hydraulics and the
rotors has stopped spinning

•

Check that all guards are properly fitted; check there are no damaged

or loose parts. Particular attention should be given to the flails to
ensure they are not damaged, cracked or missing

•

Inspect work area for wire, steel posits, large stones and other

dangerous materials and remove before starting work

•

Ensure that all warning labels are always visible and that they are not

damaged, defaced or missing

•

Lower the mower bodies to the ground when parking up

•

Check locking latches before transport and before unhitching, when

applicable

•

Wear ear defenders if operating without a quiet cab or with the cab

windows open

•

Work at a safe speed, taking into account terrain, passing vehicles and

obstacles

Содержание ROLLICUT 170































Результаты поиска

Содержание ROLLICUT 170

Отзывы:

Бренды по названию

Популярные бренды

Spearhead ROLLICUT 170, Руководство пользователя

Результаты поиска

Содержание ROLLICUT 170

Отзывы:

Бренды по названию

Популярные бренды