background image

20

Q2000HD, Q2500HD & Q2800HD Flail mower

Spearhead

Spearhead Warranty

Extended Warranty

As an extension to the 12 month warranty set out above, Spearhead will provide an additional 12 month
warranty cover subject to the Spearhead Warranty Conditions above and the Extended Warranty Condi-
tions below.

Extended Warranty Conditions

1

The extended warranty applies to hydraulic pumps, motors, valves and gearboxes only.  It

does not apply to other parts, to consumables such as lubricants, seals or filters or to
labour charges.

2

The machinery must have had an annual service carried out by an Authorised Spearhead

Dealer or a Spearhead Service Engineer within 1 month of the first anniversary of the date

of

sale and the Service Report form must have been completed and stamped by the
servicing dealer or Spearhead Service Engineer and sent to Spearhead within 14 days
after the first annual service.

3

The extended warranty does not cover costs of transportation of the machinery to or from
the dealer or Spearhead or the call out costs or travelling expenses of on-site visits.

Transfer of Warranty

The Spearhead warranty may be transferred to a subsequent owner of the machinery (for use within the
UK) for the balance of the warranty period subject to all of the warranty conditions and provided that the
Change of Owner form is completed and sent to Spearhead within 14 days of change of ownership.

Spearhead reserves the right to make alterations and improvements to any machinery without
notification and without obligation to do so.

Содержание Q2000HD





















Отзывы: