background image

Spearhead

Q2000HD, Q2500HD & Q2800HD Flail mower

19

Spearhead Warranty

The Spearhead Warranty

Spearhead warrants that the Spearhead machine referred to in the Warranty Registration Form will be free from
defects in materials and workmanship for a period of 12 months from the date of sale.  This warranty does not affect
your statutory rights, but merely adds to them.  Should you have a problem within 12 months from the date of sale
please contact your original Spearhead dealer, or Spearhead’s Service Department.  Any part found to be defective
during this period will be replaced or repaired, at Spearhead’s discretion, by the dealer or a Spearhead Service
Engineer.

Spearhead Warranty Conditions

1

The Warranty Registration Form must be completed and returned to Spearhead within 30 days of the date of
sale.

2

This warranty does not cover defects arising from fair wear and tear, wilful damage, negligence, misuse,
abnormal working conditions, use in competition, failure to follow Spearhead’s instructions (oral or written,
including all instructions and recommendationmade in the Operator’s Manual) or alteration or repair of the
machinery without Spearhead’s approval.

3

The machinery must have been serviced in accordance with the Operator’s Manual and the Service Log must
have been kept up to date and made available to the dealer should service, repair or warranty work be
undertaken.

4

This warranty does not cover claims in respect of wearing parts such as blades, flails, paintwork, tyres,
belts, hydraulic hoses, bearings, bushes, linkage pins, top links, ball ends unless there is a manufacturing
or material defect or the cost of normal servicing items such as oils and lubricants.

5

This warranty does not cover any expenses or losses incurred whilst the machinery is out of use for warranty
repairs or parts replacement.

6

This warranty does not extend to parts, materials or equipment not manufactured by Spearhead, for which
the Buyer shall only be entitled to the benefit of any such warranty or guarantee given by the manufacturer to
Spearhead.  Only genuine Spearhead replacement  parts will be allowable for warranty claims.

7

All parts replaced by Spearhead under warranty become the property of Spearhead and must be returned to
Spearhead if Spearhead so request.  Such parts may only be disposed of after a warranty claim has been
accepted and processed by Spearhead.

8

Spearhead is not liable under this warranty for any repairs carried out without Spearhead’s written consent or
without Spearhead being afforded a reasonable opportunity to inspect the machinery the subject of the
warranty claim.  Spearhead’s written consent must, therefore, be obtained before any repairs are carried out
or parts replaced.  Use of non-Spearhead parts automatically invalidates the Spearhead Warranty.  Failed

components must not be dismantled except as specifically authorised by Spearhead and dismantling of
any components without authorisation from Spearhead will invalidate this warranty.

9

All warranty claims must be submitted to Spearhead on Spearhead Warranty Claim Forms within 30 days of
completion of warranty work.

Using the machine implies the knowledge and acceptance of these instructions and the
limita tions contained in this Manual.

Содержание Q2000HD





















Отзывы: