8999153EN: v1.0 18/12/2020
43
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
6.11 Scheduled Maintenance Table
Component
Interval
1st
Hour
After
10
Hours
Weekly
Every 2
Weeks
Monthly Annually
P.T.O. Shaft
Refer to the supplied
P.T.O. shaft manual for
guidance on lubrication
X
Gearbox
Check gearbox mounting
bolts, see:
•
Section 6.5.1
(Agricut 270)
•
Section 6.6.1
(Agricut 270)
•
Section 6.7.1
(Agricut 270)
X
X
X
Check gearbox oil level,
see:
•
Section 6.5.2
(Agricut 180)
•
Section 6.6.2
(Agricut 270)
•
Section 6.7.2
(Agricut 270)
X
X
X
Change gearbox oil
X
Blade
carrier
Check mounting bolts,
see Section 6.9.
X
X
X
Blades
Check for damage
X
X
X
Check bushes for wear,
see Section 6.10.
X
X
X
Head Stock
(only Agricut
180)
Check mounting bolts,
see Section 5.2.
X
X
X
X
Other
Check all other fasteners.
X
X
6.12 Cleaning The Machine
•
Clean the machine at regular intervals, using a water blaster, focussing above all on any flammable
materials left on the machine. Make sure there is no straw, hay or flammable material left on any parts of the
machine that get hot.
•
Where necessary, use mild biodegradable detergents, complying with pollution prevention regulations when
it comes to disposing of the waste cleaning water.
•
Dry the machine immediately after washing.
•
Do not use solvents, benzene or diesel oil, which could cause early deterioration of the gaskets and other
plastic elements as well as be a risk for lubrication of the machine in general.
WARNING!
Only carry out cleaning operations with the machine disconnected from the tractor. Also
simple cleaning away of any residues of vegetation must always be carried out with the tractor engine
switched off and the hand brake on, keeping the ignition key in a pocket.
