8999153EN: v1.0 18/12/2020
4
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Agricut 180 and 270 Rotary Mowers
This manual includes instructions for installation, use and maintenance of the Agricut 180 and 270 rotary
mowers in the following sections.
The machine is intended for the topping of grass pasture land after grazing, or for weed and thistle control on
agricultural land. The machine is drawn by the tractor by means of a three-point hitch for the Agricut 180 and
the tractor lift arms on the Agricut 270. The machines work on the ground under their own weight and by
virtue of rotating rotors that are driven by
the tractor‘s power take-off by means of a P.T.O shaft connection.
Any different use should be considered improper and therefore potentially dangerous to the safety of the
operator and any exposed persons. This manual is integral to the Agricut rotary mower, defines the purpose
for which it was built and contains all the information required for proper and safe use. Regular machine
operation depends on its correct use and adequate maintenance: it is advisable, therefore, to follow these
instructions carefully to prevent any situation that could compromise the machine’s operation and durability.
It is also important to follow that which is described in this manual since Spearhead declines any liability
resulting from negligence of from not observing these norms, since it would result in the warranty being
annulled.
It is mandatory
to verify upon delivery that the Agricut rotary mower is integral and complete in all its parts.
Any complaints must presented in written within 8 (eight) days from receiving the machine. Spearhead can
however be contacted at any time for immediate and precise technical assistance and anything required for
optimum operation and maximum performance of the equipment. Upon receiving the product, carefully read
the manual and carefully follow the instructions contained in it.
IMPORTANT
This operator’s manual should be regarded as part of the machine. Suppliers of both new and second-hand
machines are advised to retain documentary evidence that this manual was provided with the machine.
This machine is designed solely for ground vegetation control and must not be used for any other purpose.
Use in any other way is considered as contrary to the intended use. Compliance with, and strict adherence
to, the conditions of operation, service, and repair, as specified by the manufacturer, also constitute
essential elements of the intended use.
This machine should be operated, serviced, and repaired only by persons who are familiar with its
characteristics and who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognised regulations on safety and occupational
medicine, and all road traffic regulations must always be observed.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any
resulting damage or injury.
It is potentially hazardous to fit or use any parts other than genuine
Spearhead
parts.
The company disclaims all liability for the consequences of such use which, in addition, voids the machine
warranty.
