8999153EN: v1.0 18/12/2020
22
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Clear any shredding debris off the rotors and blades;
Clean the machine thoroughly;
Perform a general inspection, looking out for possible damage to the structure and areas where
paintwork has been scraped off or worn away; make sure the original safety decals are attached in
their relevant positions and are intact and legible;
Securely tighten all screws and bolts, especially those fastening the blades; see Section 6.10.
Thoroughly grease any parts that usually require this kind of attention, smear all non-painted parts with
lubricant; lastly, protect all equipment with a plastic tarpaulin, while making sure there is sufficient
ventilation. Once you have finished this treatment, store the equipment in a dry place;
Where possible, store the machine indoors or under shelter, on a level, stable surface.
When carried out with due care, this procedure will ensure the equipment is in full working order and in
a perfect state of repair when the time comes to put it back into operation.
3.5.3
Removing The Machine From Packing Or Longer Term Storage
Before using the machine for the first time, or when it has not been used for long periods, proceed as follows:
Make sure the machine has not been damaged;
Make sure mechanical parts are in a good state of repair and not rusted;
Check the blades for wear;
Thoroughly grease all moving parts;
Make sure all guards are correctly fitted.
