MULTICUT 160/200
10
Introduction
The Spearhead Multicut 160 and 200 are very robust high capacity Rotary Cutters
which are easy to operate and maintain to ensure trouble-free operation this manual
should be carefully studied.
Safety First
Do not start the machine until you fully understand operation and safety precaution
requirements. Always ensure the operators are proficient with the operation of this type
of this machine.
Tractor Requirements
Spearhead strongly recommends 40hp min - MC160 / 45hp min - MC200
tractor with
CATEGORY 2
rear linkage.
Ensure there is sufficient weight on front wheels of the tractor for safe transport
and stability.
PTO must be independent live drive to enable continuous PTO drive even when
tractor clutch is pressed down.
Before hitching, ensure position control is selected. Do not attempt to hitch in
draft control.
Check chains and stabilizers must be in good working order to hold the
machine firmly. Do not operate without checking that chains and stabilizers are
tight.
Spearhead particularly recommend ‘turn buckle’ type check chains
Set linkage lift rods to an equal length.
