background image

MULTICUT 160/200 

 

 

8

 

 
 
 
 
 
 
 
 
 
 

  Never operate the machine with other people present, as it is possible for 

debris, including stones, to be discharged from the front and rear of the 
main deck. 

Bystanders should be kept 92m (300feet) away from the 

mowing operation. 

  Always ensure all safety guards are in place and all tractor windows are 

closed. 

  Never allow an inexperienced person to operate the machine without 

supervision. 

  Never allow children to play on or around the machine at any time. 

  Never attempt any maintenance or adjustment without first disengaging 

the PTO, lowering to the ground, stopping the tractor engine and 
applying the tractor parking brake. 

  Before leaving the tractor cab always ensure that the machine is firmly 

on the ground, and the rotor has stopped spinning 

  Never stop the engine with the PTO engaged. 

  Always check that all guards are properly fitted, check there are no 

damage or loose parts. Particular attention should be given to the flails to 
ensure they are not damaged, cracked or missing. 

  Never operate with damaged blades. 

  Always operate PTO at recommended speed. 

  Always inspect work area for wire, steel posts, large stones and other 

dangerous materials and remove before starting work. 

  Never operate with wire around rotor. Stop immediately. 

  Never attempt to use the machine for any purpose other than that it was 

designed for. 

  Ensure that all warning labels are always visible and that they are not 

damaged, defaced or missing. 

  Never transport with the PTO engaged. 

  When parking up always lower to the ground. 

  Where applicable, check condition of tyres and that wheel nuts are tight. 

  During transport, ensure linkage stabilisers are fully tightened and 

observe public highway regulations. 

 
 

 
 
 
 
 

 
   Safety  

 

 

Important Safety 

Содержание 8999008






















Отзывы: