EMERGENCY TANK SHOWER TRAINING | PG.
2
SPECIFICATIONS
Features
EYE/FACE WASH FEATURES:
• Yellow Plastic Bowl
• (2) yellow plastic spray outlets with flip-top dust caps
• ½” NPT female brass, chrome-plated, full flow stay-open
ball valve
• Stainless steel push handle activator
SHOWER FEATURES:
• Insulated 528 gallon (2000 ltr) Polyethylene Tank
• Support frame constructed from 1-1/2 x 1-1/2 x 1/8 hot dipped
galvanized tubular steel, with fixed bolt down brackets
• Ø10-1/4” stainless steel shower head
• 1-1/2” NPT female stainless steel full flow ball valve, activated
by yellow steel Push Bar
• Mechanical water level gauge
• 1” NPT water fill inlet, with valve and ball float for automatic
shutoff when tank is full
• 1” NPT water overflow outlet
• 240 Volt, Single Phase, 50/60Hz, 13.88 Amps
• 3kw Immersion Heater that will maintain an approximate
water temperature of 86° F at an ambient temperature of 14 °F.
• Heat Tracing for Shower and Eyewash Piping
• PIR Sensor and Area Downlight
• Thermal cutoff to shutoff electrical power to prevent
overheating conditions
• Universal emergency signage
• Weights:
• 1598 lbs. (un-filled)
• 6004 lbs. (filled)
OPTIONS:
❑
TS-TREADLE
Treadle plate activator for main shower
❑
TS-BUND
Water Collection Bund
❑
TS-SSEYEWASH
Eyewash with Stainless Steel Bowl
❑
TS-SCREENS
Privacy Screens (3) Sides
❑
TS-SSSUPPORT
Stainless Steel Support Frame
❑
TS-GAUGE
Digital Water Lever and Water Temperature Gauge
❑
TS-ALARM
Alarm System for both Shower and Eyewash
COMPLIANCE:
• Complies to ANSI/ISEA Z358.1
• Constructed using UL Approved Electrical Components
WARRANTY:
• 3 year (general mechanical) limited
• 1 year (electrical equipment) limited
14
13
38
97
1470
Plan
Front Elevation
NOTE: 1. All dimensions are in inches (millimeters) unless
otherwise specified and are subject to change without notice.