USAGE INSTRUCTIONS
NOTE:
The timing shown is the
Maximum Cycle Time
before the unit will switch to the next function or turn OFF if it is
on the last function in that process. User can press the
Stop Button
or
Press the Knob
to stop the cleaning function early.
MASSAGE CLEANING 30S
MASSAGE CLEANING 30S
AUTOMATIC STOP
AUTO REAR CLEANING
REAR CLEANING 20S
DRY 180S
REAR CLEANING 40S
AUTO FRONT CLEANING
FRONT CLEANING 20S
FRONT CLEANING 40S
DRY 180S
AUTOMATIC STOP
STOP
HOLD TO ECO
ENERGY SAVER
• Holding the "STOP" button for more than 3 seconds will place the unit into Energy Saving Mode. The
standard indicator light will turn off and the Energy Saving Mode indicator light will illuminate. Holding the
"STOP" button again for more than 3 seconds will exit Energy Saving Mode.
• Under energy saving mode, seat temperature is automatically adjusted to a low level to achieve energy
saving. (
NOTE:
If the seat temperature before energy saving is neutral, keep the neutral after energy saving)
IMPORTANT!
Energy saving mode will be suspended and switch to standard mode if someone uses the
seat in the middle of energy saving. The seat will begin to heat immediately and the Energy Saving Mode
will automatically be engaged when the user leaves the seated position.
AUTO FUNCTION
(Only for the units with the Auto Wash Function.)
• If your model includes the Auto Cleaning Function, a quick press of the " " or " " button will begin the
fully automatic cleaning process.
• The default settings for the Auto Cleaning Function place the water flow, spray nozzle position, water
temperature, drying air temperature, and seat temperature in the middle setting for each.
• You have the ability to customize and save your own Auto settings. Make your adjustments to the water
flow, nozzle position, water temperature, and air temperature settings. Holding the " " or " " button for
3 seconds will save your customized settings. During the next use, pressing the " " or " " will engage
your custom settings automatically.
NOTE:
Certain models don’t have drying function.
TEMPERATURE ADJUSTMENT
WATER TEMPERATURE ADJUSTMENT
• Short press the “WATER TEMP” button to adjust the water temperature. The indicator will show the water
temperature level if it’s on. When the indicator is off, the water heating setting is 0. Short press this button to
adjust water temperature level from 0 to 5.
Note:
The water temperature is approximately 50º Fahrenheit at setting "0". If the water temperature falls
below 50º Fahrenheit the heater will engage to bring the temperature back in range.
NIGHT LIGHT
(Only for toilets with night light function.)
• Short press “Night light” button to turn on/turn off night light, long press “Night light” button to enter into
intelligent mode ( Night light will be on or off by detecting the lightness of surroundings). If the product is on
intelligent mode, short press “Night light” button to exit intelligent mode.
DRYER TEMPERATURE ADJUSTMENT
(Only for toilets with drying function.)
• Short press the “DRYER TEMP” button to adjust the dryer temperature. The indicator will show the dryer
temperature level if it’s on. When the indicator is off, the level is 0. Short press this button to adjust dryer
temperature level from 0 to 5.
SEAT TEMPERATURE ADJUSTMENT
• Short press the “SEAT TEMP” button to adjust the seat temperature.
The indicator will show the seat temperature level if it’s on. When the indicator is off, the seat level is 0.
Short press this button to adjust seat temperature level from 0 to 5.
SEAT TEMP
WATER TEMP
DRYER TEMP
PULSATE
CLEAN
LIGHT
H/C
CLEAN
