USAGE INSTRUCTIONS
REAR CLEANING
• Press "REAR/MOVE" button. Remote will
illuminate to show you the water temperature and
start the rear cleaning process.
• Pressing the "REAR/MOVE" button a second
time will engage the MASSAGE feature. This will
move the cleaning nozzle forwards and
backwards while cleaning.
• The cleaning cycle will stop automatically when
complete, or can be stopped at any time by
pressing the "STOP" button.
DRYING OPERATION
(Only for toilets with drying function.)
• Press "Dry" button. The Remote will illuminate to show the drying air temperature and start the
drying process.
• The drying cycle will stop automatically when complete, or can be stopped at any time by leaving the
seated position.
NOTE:
During front/rear cleaning, long press “Rear cleaning/massage” or “Front cleaning/massage”
button to turn ON/OFF pulse cleaning mode. (This function only applies to product with pulse cleaning
mode.)
FRONT CLEANING
• Press "FRONT/MOVE" button. Remote will
illuminate to show you the water temperature and
start the front cleaning process.
•Pressing the "FRONT/MOVE" button a second
time will engage the MASSAGE feature. This will
move the cleaning nozzle forwards and backwards
while cleaning.
• The cleaning cycle will stop automatically when
complete, or can be stopped at any time by
pressing the "STOP" button.
REAR/MOVE
PRESSURE
POSITION
FRONT/MOVE
STOP
HOLD TO ECO
DRY
REAR
FRONT
DRY
USAGE INSTRUCTIONS
WATER FLOW ADJUSTMENT
• During the Rear or Front Cleaning process, pressing the "+" or "-" buttons will increase or decrease the
water flow and the remote will illuminate to show you the current setting.
PRESSURE
POSITION
REAR/MOVE
FRONT/MOVE
DRY
NOZZLE
PULSATE CLEAN
(This function only applies to products with the Pulsate clean function.)
• During the Rear or Front Cleaning process, pressing the "PULSATE CLEAN" button will alternate the water
pressure between strong/weak. This will continue until the end of the cleaning process, or can stopped by
pressing the "PULSATE CLEAN" button a second time.
HEAT & COLD CLEAN
(This function only applies to product with Heat & Cold clean function.)
• During the Rear or Front Cleaning process, pressing the "H/C CLEAN" button will alternate the water
temperature between hot/cold. This will continue until the end of the cleaning process, or can be stopped by
pressing the "H/C CLEAN" button a second time.
SPRAY NOZZLE POSITION ADJUSTMENT
• During the Rear or Front Cleaning process, pressing the " " or " " buttons will adjust the spray
nozzle forward/backwards and the remote will illuminate to show you the current position. There are 5
levels of position adjustment.
