IMPORTANT!
Ensure mounting location is smooth and capable of accepting adhesive mounting.
Do NOT install unit where it may come in direct contact with water.
INSTALLING THE WALL BRACKET WITH ADHESIVE
1. Properly clean the determined mounting area.
NOTE:
Location of wall mount bracket should be
accessible while seated on the Bidet.
2. Remove the paper backing from the Adhesive
Tape. Align Wall Bracket to the desired mounting
position, and firmly press into position. Cover the
Mounting Holes with the included Caps.
3. Install 3 AAA batteries into the Remote Control
and replace cover.
4. Place the Remote Control into the Wall Bracket.
REMOTE CONTROL ICON FUNCTIONS
REAR CLEANING/MASSAGE
INCREASE WATER FLOW
FRONT CLEANING/MASSAGE
DECREASE WATER FLOW
DRYING
AUTO REAR CLEANING
INDICATOR LIGHT
(Only Visible When
The Light Is On)
DRYER TEMPERATURE
WATER TEMPERATURE
NIGHT LIGHT
MOVE NOZZLE FORWARD
MOVE NOZZLE REARWARD
AUTO FRONT CLEANING
STOP/ENERGY SAVER
SEAT TEMPERATURE
SEAT TEMP
WATER TEMP DRYER TEMP
* Models without drying
function will not have
this button
* Models without drying
function will not have
this button
PULSATE CLEAN
* Models without
Pulsate clean function
will not have this button
HEATED/COOLED CLEAN
*Models without HEATED/
COOLED CLEAN will not have
this button.
LIGHT
LIGHT
INSTALLATION
AREA
