background image

34

LImITED 2-YEAR WARRANTY

SpeakerCraft, Inc. warrants to the original retail purchaser only (“you”) that this product will be free from defects 

in materials and workmanship for a period of two years (the “Warranty Period”), subject to the limitations and 

exclusions set out in this Limited Warranty. This warranty is not transferable to subsequent owners of the product. 

If you discover a defect in material or workmanship within the Warranty Period, you can obtain warranty service 

by contacting SpeakerCraft during the Warranty Period at 877.888.9004 or [email protected]  or 

by sending the product to SpeakerCraft at 940 Columbia Avenue, Riverside, CA 92507 or to the dealer from 

whom you purchased the product. Defective products must be shipped, prepaid and insured, together with 

proof of purchase. Warranty service requests made without proof of date of purchase will be denied. Freight col-

lect shipments will be refused. It is preferable to ship this product in the original shipping container to lessen the 

chance of transit damage. In any case, the risk of loss or damage in transit is to be borne by the purchaser.

If, upon examination by SpeakerCraft it is determined that the unit is in fact defective, SpeakerCraft will, at its 

option:

• Repair or replace the product at no additional charge; or

• If the model is no longer available and cannot be repaired effectively, replace the unit with a current model 

of equal or greater value. In some cases where a new model is substituted, a modification to the mounting 

surface may be required. If mounting surface modification is required, SpeakerCraft assumes no responsibility 

or liability for such modification. SpeakerCraft will bear the cost of returning the repaired or replaced product 

to you, freight prepaid. All replaced parts and product become the property of SpeakerCraft. The forego-

ing  is  your  sole  and  exclusive  remedy  for  breach  of  warranty.  If  the  product  is  not  found  to  be  defective, 

SpeakerCraft will contact you to arrange for return of the product to you, at your expense.

EXCLUSIONS:

• This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, 

negligence,  inadequate  packing  or  shipping  procedures,  commercial  use,  voltage  inputs  in  excess  of  the 

rated  maximum  of  the  unit,  or  service,  repair  or  modification  of  the  product  by  unauthorized  dealers.  This 

Warranty also excludes normal cosmetic deterioration caused by environmental conditions.

• This Warranty will be void if:

• The Serial Number on the product has been removed, tampered with or defaced.

• The product was not purchased from an authorized dealer.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED AND ImPLIED WARRANTIES. 

SPEAKERCRAFT  EXPRESSLY  DISCLAImS  ALL  SUCH  OTHER  WARRANTIES,  INCLUDING  BUT  NOT  LImITED  TO  ImPLIED 

WARRANTIES OF mERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEmENT.

 In no event 

will SpeakerCraft be liable for any incidental or consequential damages arising out of the use or inability to use 

the product, even if SpeakerCraft has been advised of the possibility of such damages, or for any claim by any 

other  party.  Notwithstanding  the  above,  if  you  qualify  as  a  “consumer”  under  the  Magnuson-Moss  Warranty 

Act, then you may be entitled to any implied warranties allowed by law for the Warranty Period. Further, some 

states do not allow limitations on how long an implied Limited Warranty lasts or allow the exclusion or limitation 

of consequential damages, so such limitations may not apply to you.

ATTENTION TO OUR VALUED CONSUmERS:

To insure that consumers obtain quality pre-sale and after-sale support and service, SpeakerCraft products are 

sold exclusively through authorized dealers. 

SpeakerCraft products are only sold online by a very select group 

of dealers as authorized internet resellers.

 To determine if your SpeakerCraft reseller is authorized, please call 

SpeakerCraft at 877.888.9004 or go to speakercraft.com. This warranty is 

VOID

 if the products have been pur-

chased from any unauthorized reseller including internet sites not authorized by SpeakerCraft.

 

Should you have any questions regarding this, or any other SpeakerCraft product, please call our service hotline 

at 877.888.9004 or email [email protected]

We are available to assist you every weekday, except holidays, between the hours of 7:00 a.m. and 5:00 p.m. PST.

Содержание Vital 710





































Отзывы: