SpeakerCraft Vital 710, Руководство по установке, Страница: 23 / 36

23
CONNECTIONS
Stereo Audio/Video
Patch Cable
CABLE/SAT
A/V OUT
Vital 710 VID 3 Audio IN
Vital 710 VID 3 Video IN
Figure 15 Video 3 Connections
Video 3 Rear Panel Connections
Connect a Cable Box, Satellite Receiver or other au-
dio/video source to the VID 3 A/V Inputs on the Vital
710 Rear Panel as shown in Figure 15 .
1. Using a stereo A/V patch cable with gold ends,
connect the L&R line level audio OUT of the Cable
Box to L & R VID 3 Audio IN on the Vital 710. Con-
nect the composite video OUT on the Cable Box to
the VID 3 Video IN on the Vital 710.
IR Single Flasher
w/red LED
DVD
Remote Control
Vital 710 Rear Panel
Flasher Out
IR Power
Supply
IR Shelf Top
Receiver
Remote IN
Mono Mini to
Mono Mini Cable
Figure 16 Remote IN Connections with IR Flashers
Remote IN/OUT Connections
The Remote IN Jack on the Vital 710 Rear Panel allows
direct connection to the Flasher Output of an IR control
system. This allows the Vital 710 to be controlled when
hidden in an equipment cabinet or closet, or from
another room. Using the Remote IN Jack eliminates the
need for attaching IR Flashers to the front panel of the
Vital 710.
The Remote OUT Jack can be connected to source
components, that are equipped with compatible IR
Control Input connections. This eliminates the need for
IR Flashers on these devices.
Figure 16 shows an application where the Vital 710
Remote IN is connected to a SpeakerCraft IR Control
System. In this example an IR Flasher is used on the DVD
Player because it does not have an IR Control Input.
Additional IR Receivers can be added for control from
additional rooms. Additional Flashers can be added to
control additional sources.
Figure 17 shows an application where the Vital 710
Remote IN is connected to a SpeakerCraft IR Control
System. In this case, all of the sources have compatible
IR Control Inputs and are daisy-chained for IR control
without using IR Flashers.
Note: Not all devices that feature IR Control Inputs will
be compatible with the Remote IN/OUT connection
on the Vital 710. IR Control Inputs typically receive IR
signals that have had the carrier stripped but not all will
be compatible. In some cases, IR Flashers will have to
be used.
To make Vital 710 Remote IN/OUT Connections:
1. Using a mono mini-mini cable connect the Flasher
OUT on a SpeakerCraft Amplified Terminator to the
Remote IN Jack on the Vital 710 Rear Panel.
2. If using IR Flashers, connect the Flasher mini plug to
a Flasher OUT on the Amplified Terminator. Attach
the Flasher to the device being controlled, over the
IR eye on that device.
Vital 710
Rear Panel
Remote IN
Mono Mini to
Mono Mini Cable
Source A
Rear Panel
Source B
Rear Panel
Mono Mini to
Mono Mini Cable
Mono Mini to
Mono Mini Cable
Flasher OUT
Remote OUT
Remote Control
IR Power
Supply
IR Shelf Top
Receiver
Figure 17
Remote IN/OUT Connections with IR Control Inputs
(Figure 16) Add additional Flashers as needed.
3. If using source components that feature IR Control Inputs, using a mono mini-mini cable connect the Re-
mote OUT on the Vital 710 Rear Panel to the IR Remote IN Jack on the device being controlled.
4.
To connect additional devices with IR Remote Inputs, connect a mono mini-mini cable to the IR Remote
OUT on Source A to the IR Remote IN on Source B as shown in Figure 17. Repeat Step 4 as needed.