SpeakerCraft Vital 710, Руководство по установке

Страница: 10 / 36

10
24. VID 1 IN/OUT -
(6 RCA Jacks) Connect to the left and right line level audio and composite video inputs and
outputs of an audio/video recorder for recording and playback of analog audio and composite video. The
VID 1 Out Jacks output line level audio and composite video from the currently selected source. (If it is an
A/V source.) VID 1 In is selected by pressing the Video 1 button on the Vital 710 Front Panel or Remote Con-
trol. The Front Panel Display will indicate VIDEO 1.
IN - Connect to the left and right line level audio and composite video outputs of a video recorder.
OUT -
Connect to the left and right line level audio and composite video inputs on a video recorder.
25. VID 2 IN - (3 RCA Jacks) Connect to the left and right line level audio and composite video outputs of a
DVD Player, Satellite Receiver, Cable Box or other audio/video device. VID 2 In is selected by pressing the
VIDEO 2 button on the Vital 710 Front Panel or the VID 2 button on the Remote Control. When selected, the
Front Panel Display will indicate VIDEO 2.
26. VID 3 IN - (3 RCA Jacks) Connect to the left and right line level audio and composite video outputs of a
DVD Player, Satellite Receiver, Cable Box or other audio/video device. VID 3 In is selected by pressing the
VIDEO 3 button on the Vital 710 Front Panel or the VID 3 button on the Remote Control. When selected, the
Front Panel Display will indicate VIDEO 3.
27. mONITOR OUT -
(1 RCA Jack) Connect to the composite video input of a TV, or Video Display.
28. REmOTE - (2 mono 3.5mm mini jacks) Allow connection to an IR Repeater System, (IN) and to appropriately
featured devices with IR Control Inputs (OUT) for increased flexibility of IR control.
REmOTE IN - (1 mono 3.5mm mini jack) Connect to the standard IR Flasher output of an IR repeater
system for remote control without having to use an IR Flasher. This connection also allows remote room
control of the Vital 710 when connected to a whole-house IR repeater system with multiple IR Receivers.
(Visit www.speakercraft.com and select ‘Products/Control Systems/SmartPath’ for additional informa-
tion.)
REmOTE OUT - (1 mono 3.5mm mini jack) Connect to the IR In on a device equipped with an appropri-
ate IR Control Input. These types of inputs typically accept an IR control signal that has had the carrier
stripped.
Note: Devices that feature IR Control Inputs for stripped carrier signals typically have parallel ports that
allow daisy chaining multiple devices.
29. UPDATE - Special factory connection for loading firmware and testing the Vital 710. No user connection
required.
30. RESET -
Should the Vital 710 ever perform improperly, press this recessed button to return the unit to normal
operation. If possible, set the unit to Standby by pressing the ON/Standby Switch, (switch backlight red). Us-
ing a small, non-conductive blunt object, press the Reset button. The Vital 710 should be restored to normal
operation.
31. AC POWER CORD - A two prong power cord connects to an unswitched 110VAC outlet to provide power to
the Vital 710.
32. SUB OUT 1 -
This group includes one, 3.5mm 2-circuit (mono) mini jack for subwoofer trigger output; one,
RCA jack for full-band mono line level audio and a Link S/W Switch to sync a subwoofer with Speaker A ON/
OFF status.
SUB A ON/OFF LINK S/W -
In the OFF position, Sub A Mono Out will pass full band mono line level audio,
regardless of Speaker A ON/OFF Status and Trigger 1 Out has no function. In the ON position, when
Speaker A is turned OFF, Sub A Mono Out is mute and Sub A Trigger is 0 VDC (sub OFF). When Speaker A
is turned ON, Sub A Out outputs full band mono line level audio and Trigger 1 Out will output 15VDC (sub
ON).
SUB A mONO OUT - Connects to the mono line level audio input on an amplified subwoofer to be used
with Speaker A. If adjustable, set the crossover point on the sub per sub manufacturer’s instructions.
SUB A TRIGGER OUT - Connects to the Control In Terminal on the sub to turn the sub ON/OFF with Speak-
er A ON/OFF status. Check sub Control In polarity and voltage rating before making any connections.
(Trigger Out ON = 15VDC)
Trigger Out Polarity: TIP= +15VDC; SLEEVE =GND.
Vital 710 REAR PANEL FEATURES