7.3 SERVICE
The manufacturer provides a 12-month warranty. Minor post-warranty repairs may be carried out by
the user only after consulting the manufacturer. If necessary, the manufacturer send spare parts
which were ordered. Major post-warranty repairs should be performed by the manufacturer or an
authorized service center.
8.
LIST OF SPARE PARTS
8.1. LIST OF SPARE PARTS THAT WEAR OUT QUICKLY
Torch components such as electrode nozzles, caps, shields
8.2. DAILY SERVICE LIST OF ACTIONS BEFORE STARTING WORK
inspect the technical condition of the machine, check that all the components are ready for work
visually inspect the condition of electrical wiring, gas and air lines
in the event of any faults, they must be rectified before putting the machine into operation
wipe the linear guides of the X and Y axis with a dry cloth
These activities must be carried out with the device powered off
8.3. DAILY MAINTENANCE LIST OF ACTIONS AFTER ENDING WORK
clean spatters and dust off the burner with a dry cloth
use the compressed air to blow out dust and spatters from the X- and Y-axis gears
check and clean the burner consumables, replace them if necessary.
9.
PERIODIC SERVICE
Tank and table cleaning, depending on the intensity of use.
Greasing of the ball screw of Z axis in every 20 hours of operation.
IT IS FORBIDDEN TO CARRIED OUT A WELDING PROCESS OR GRINDING WORKS "ON THE MACHINE"
OR NEARBY. THIS COULD DAMAGE THE CONTROLLER, FOR WHICH THE MANUFACTURER IS NOT
RESPONSIBLE. THE WARRANTY COULD BE VOID AS WELL.
