CNC table scheme
1. Working machine head
2. Top-up valve (opens and closes the reservoir tank after switching on or off respectively)
3. Coolant drain valve (for retention tank)
4. Plasma torch
5. Pump
6. Retention tank
7. Plotter bar Y axis
8. Adjustable bases for leveling the machine
9. Control panel with a computer
10. Start/Power switch
11. 230V AC socket supplying the computer
12. Main switch
13. Emergency stop switch
14. Y- limit switch
15. X+ limit switch (X- switch at the other end of the running rail)
16. Z+/Z- limit switch
17. Y + limit switch
3.10. ELECTRICAL SAFETY DURING STANDARD OPERATION
When operating the machine, follow the rules and guidelines below:
before starting work, the operator should check the technical condition of the machine by visual
inspection, in particular, the condition of guards, fastening elements and general condition of the
electrical installation
if the operator finds out that the machine is out of order, he should immediately secure it from
starting it up and notify maintenance department or manager
there must not be unnecessary items or tools on the numerically controlled table and control
cabinet
only use original consumable parts for work
