Spartan 758 Water Jet, Руководство пользователя

Страница: 13 / 74

Page 13
Start Up
— Check water tank level. This water jet is equipped with a Low Water Shut-Off switch that will
prevent the engine from starting at low water levels.
— Check fuel level.
Note: Also Check engine and pump oil levels per manufacturer specifications (attached).
— Turn high pressure reel supply valve “off”.
— Hold in red relay button and key start the engine. Choke as necessary.
— Allow the engine to warm up at idle for 3 to 5 minutes before putting engine under load.
Engine Shut-Down
— Turn high pressure reel supply valve “off”.
— Allow engine to idle for 1 to 2 minutes
— Turn the engine key switch OFF . (The engine key switch must be OFF when the engine is not running to
avoid battery draining.)
Engine Operating Procedure
Operator Controls (cont.)
Drain Valve