Sparraw SP RUN104, Руководство пользователя

Страница: 35 / 37

This electronic product must not be disposed of in municipal waste. To preserve the environment, this product
must be recycled after its useful life as required by law.
VIIl.COMMON ERRORS :
ERRO CODE REASON HOW TO SOLVE
NO DISPLAY
A) electricity not connected Connect the electricity
B) power switch not turn on Turn on power switch
C) pcb no power or broken Press over-load protector or change new pcb
D) signal wire not connected Re-connect signal wire or change new one
E) computer broken Change new computer
F) background light broken Check background light wire or change new one
NOT DISPLAY ALL
INFORMATION
A) display drive IC not inserted well Re-insert IC,and re-weld it or change new one
B) EMI gasket slip, not well fastened Re-assemble screen
NOT RUN SMOOTHLY
A) driving position has resistance Adjust driving position, or add some silicon oil
B) running belt too tight or too loose Adjust the belt tension
C) pcb torque too big or too small Ajust torque to right position
---OR----
(OR E00/E07)
A) safety key off Put on safety key
B) magnetron not fixed well Fix magnetron to right position
E01/E13
A) signal wire not well connected Re-connect signal wire
B) signal wire broken Change new signal wire
C) signal wire broken Change new computer
D) pcb broken Change new pcb
E02
A) motor wire not well connected, or open
circuit
Re-connect motor wire or change new motor
B) IGBT on pcb broken Change new pcb
C) input voltage too low Stop using, ask electrician to check
E03
A) speed signal wire not well connected, or
sensor broken
Re-connect speed signal wire or change new sensor wire
B) pcb broken Change new pcb
E04
A) incline motor wire not well connected Re-connect incline motor wire
B) incline motor broken Change new incline motor
C) pcb broken Change new pcb
E05
A) over-loaded Turn off and re-start machine
B) driving position hinder Adjust driving position, or add oil
C) motor short circuit Change new motor
D) pcb burnt Change new pcb
E06 A) motor wire not well connected Re-connect motor wire