Sparr Electronics Limited
Page 8
9. Factory Default Values
Default config.txt file contain CAN Bitrate value as 500kbps, Model ID as 19, File Size as 5 MB. Default rtc.txt
file contains dispatching Day Date & time. It is recommended to configure config.txt & rtc.txt files as per your
requirement before connecting the device
10. Troubleshooting
Problems
Solutions
1) Power Red LED is not
glowing when connected
to ODB2?
Check whether the power is available in the OBD2
Connector. Check the OBD2 Cable used between
data logger and the slave device.
2) If the Device is not
detecting as Drive?
Check whether USB Cable is connected properly.
USB Port of the PC is functioning properly.
Check Green (Power) LED is ON
3) Data is not logging?
Check Power Red LED is ON when connected to
OBD2 connector.
Check Status (Yellow) LED is blinking slowly.
Check Status (Yellow) LED if it is blinking fast
indicating that memory is full.
Check config.txt file is edited properly and copied to
the device.
11. Contact and Support
Sparr Electronics Limited.,
No.414A, 7
th
Main Road,
1
st
Block, HRBR Layout,
Banaswadi,
Bangalore - 560 043, INDIA.
Phone:
+91-80-41278033
Call Technical Support at
+91-80-41278033
Website
Email for:
Product Information :
Support
Sales
:
Содержание CAN
Страница 1: ......
