Action while holding
Trigger an event as soon as a button is pressed, then continue to trigger
that event as long as the button is held down.
•
“While button number __ is pressed”
- This is the number of the
button we wish to assign to this action. The button numbers are
printed on the board, and run from 0 through 8.
•
“activate channel number __”
- A continuous will be sent out on
this channel. It is suitable for triggering and repeating a sound, or for
turning on and keeping on (at least, while the button is held) a
lighting effect.
Latch On/Latch Off
This action is like a latching power switch. One press turns the signal on,
another later press turns the signal off.
•
“While button number __ is pressed”
- This is the number of the
button we wish to assign to this action. The button numbers are
printed on the board, and run from 0 through 8.
•
“activate channel number __ until button is pressed again”
- A
continuous will be sent out on this channel. It is suitable for triggering
and repeating a sound, or for turning on and keeping on a lighting
effect.
Page 9 of 33
