Action on release
Trigger an action when a button is released, regardless of how long it has
been held down prior to being released.
•
“When button number __ is released”
- This is the number of the
button we wish to assign to this action. The button numbers are
printed on the board, and run from 0 through 8.
•
“trigger channel number __”
- A single, momentary pulse will be
sent out on this channel. It is suitable for starting a sound, initiating a
motion, or setting the color of a light strip, but not for continuous
sound playback or for turning on a light strip effect, for instance.
Action on press or release
Trigger an action when a button is pressed, then trigger the same action
again when the button is released.
•
“When button number __ is either pressed or released”
- This is
the number of the button we wish to assign to this action. The button
numbers are printed on the board, and run from 0 through 8.
•
“trigger channel number __”
- A single, momentary pulse will be
sent out on this channel both at the time the button is pressed and at
the time it is released. It is suitable for starting a sound, initiating a
motion, or setting the color of a light strip, but not for continuous
sound playback or for turning on a light strip effect, for instance.
Page 8 of 33
