Page 15
Range Hood Operations-
Electronic switch:
Turning Fan ON:
Always turn fans ON before cooking to establish air flow and allow fans to run for a few minutes after
cooking
for cleaner air in the kitchen. The Power Control (+) button must be touched before a Speed Control button
can
be activated.
• Touch a Speed Control button (+) once to start the fan, once again to activate medium speed (M) and
again to activate high speed (H)
The fan always starts at high speed and few seconds later goes back to low speed, which is normal.
Control Panel Layout and Buttons Configurations:
Turning Fan OFF:
The 10-Minute Power-Off delay function will only turn OFF the fan.
The light settings will not be affected by the delay function. If they are ON, they will stay ON.
10-Minute Delay
• While the fans are operating, touch the Digital Timer (clock) on left will start flashing and fan will
shut OFF after 10 minutes .
• During this 10-minute delay, changing speeds will not affect the countdown.
Immediate Power-off
• Touch the minus ( - ) Control (On/Off) button and the fan will be turned OFF immediately.
Light Control:
Light Control button operates independently from the Power Control (On/Off) and Power-Off Delay Con
-
trol.
Pressing the Power Control (On/Off) button or activating the delay function will not turn halogen lights ON
or
OFF. The lights have 2 settings: ON/OFF.
CAUTION:
DO NOT touch the lights until switched OFF and cooled.
Range Hood Operations ( Electronic control )
