Page 10
Installation
This range hood come with mounting brackets, one main and one or two additional for the chimney cover.
The range hoods shall be placed at a distance of 24-30” from the cooking surface for best performance. See
Page 5.
b) Drill three Ø8 mm holes in a horizontal line at the appropriate height for installation of the mounting bracket.
c) Insert brick anchor bolts (drywall anchor) into the holes , fix the mounting bracket on the wall, then secure
the cooker hood to it see Pic 2.
d) Install the 6” vent with the dampers into the duct connector of the range hood with 4 screws (4x8mm).see
below.
e) Install the 6” metal duct onto the vent, use aluminum tape to seal it and metal tie to secure it.
f) Put the two ( lower and upper) decorative duct cover on the hood, then adjust the inner duct cover to the
appointed height, see Pic5; drill two Ø8 mm holes in a horizontal line for installation of the other mounting
bracket and then attach the upper bracket . (Note: The hood can be installed on drywall and brick wall) Raise
the upper hood cover into its mounting position see. Secure the duct cover to the mounting bracket with the
screw provided in the box.
Screw
