www.spacelabshealthcare.com
1 2 - 6
X P R E Z Z O N
A N D
Q U B E
O
P E R A T I O N S
M
A N U A L
M
O N I T O R
S
E T U P
Local Config
Use the settings on the
Local Config
tab to:
• Select a subset of parameters for display
• Change the color used to display parameter waveforms
• Change the order in which parameters show on the display
• Determine how a parameter is shown: as numerics only or as numerics and a
waveform
• Restore factory defaults for all display configurations
In the monitor’s default configuration, parameters show in order of their priority.
The highest priority shows at the top of the display with the number 1. Factory-
default colors and priorities show in the table below.
You can save up to five different display configurations for parameter waveforms,
and you can change the names of the configurations. The default names are
1
,
2
,
3
,
4
, and
5
.
Depending on the Parameter Set selection, the parameter list will show all
parameters or only the parameters that are currently being monitored.
Figure 12-5 Local Config tab
