Space-Ray SRB40CRE-B2, Инструкция по установке и эксплуатации, Страница: 15 / 30

Form 43539178
Oct 2019
14
No. of Brooders x 12.0VA x 1.25 Safety Factor = Transformer Size
No. Brooders Minimum Transformer VA
14 210
15 225
16 240
17 255
18 270
19 285
20 300
21 315
22 330
23 345
24 360
25 375
4.
The wire to the #2 type brooders MUST be a minimum 2.5mm
2
.
5. Failure to connect the #2 type brooders to the minimum power supply recommended or to
use a cable less than the minimum size specified will result in the brooder not functioning
properly.
6. A Thermostat is also required for each brooder or group of brooders as shown in the
schematic. The schematic (Figure 8) shows a group of four (4) brooders controlled by one (1)
thermostat. Additional zone groups having more or less brooders can be added. These
should be wired the same as shown in the schematic.
SCHEMATIC Figure 8
The schematic above shows the lay-out for the No 2. Control 24V. For control No 4 use the same
drawing above only replace the voltage with 230V and the wiring by 1,5mm