Space-Ray ADL25-HB, Дополнительная инструкция

Страница: 15 / 17

Form 44201129
Oct 2019 rev A
14
12.0) REPLACING COMPONENTS
IMPORTANT: Disconnect gas and electricity supplies to the appliance (and system) before carrying out any
repair work. This work can be carried out at high level using a purposes designed access tower, but it is
preferable that this work should be carried out at ground level.
1. Exhaust Fan
A. Type 1 Fan.
B. Remove the cover from the Exhaust Fan terminal housing and remove the electrical leads.
C. Disconnect the flue from the fan outlet.
D. Slacking the screws of the Torctite Coupling securing the Fan Connector to the Manifold Tube and draw the
Fan Assembly off the Manifold Tube.
E. Remove the Fan Connector (inlet) and Flue Adaptor (outlet) from the fan.
F. Type 3 Fan.
G. Remove the cover from the Exhaust Fan terminal housing and remove the electrical leads.
H. Disconnect the flue from the fan outlet.
I. Slacking the Hose Clips securing the Fan Connector to the Manifold Flexible Coupling.
J. Remove the screws securing the Exhaust Fan to the Mounting Bracket and draw the Fan off the Manifold
Tube.
K. Remove the Fan Connector (inlet) and Flue Adaptor (outlet) from the fan.
Note: When re-assembling the Fan Connector and Flue Adaptor, new gaskets must be fitted between them
and the Fan Case (inlet) and Fan Outlet Flange.
12.1) REPLACEMENT PARTS LIST
The following is a list of replacement parts which may be required during the life of the appliance.
Part Part Number
Gasket (Type 1 Fan Inlet) 4260506
Gasket (Type 1 Fan Outlet) 4260507
Gasket (Type 3 Fan Inlet) 4260508
Gasket (Type 3 Fan Outlet) 4260509
Damper Assembly 4250789
Fan (Type 1) 4262255
Fan (Type 3) 4262254