Before operating the spa pool ensure the following conditions are checked:
1/ That the spa pool support equipment is properly plugged in. Check that
each item is plugged into the correct socket as marked on the controller's
label.
2/ Ensure that the power supply is correctly rated, ie. a 15 amp system is
plugged into a 15 amp rated outlet. Rating is printed on front decal of
control box.
3/ The control
must not be installed on an extension cord. If the location of
a suitable supply is further from the spa than required ensure a
qualified
electrician fits a suitable power supply lead or power point.
4/ Fill the spa pool to the correct operating level as specified by the
manufacturer.
5/ The spa pool equipment must be adequately ventilated. Ensure the
manufacturer has provided proper ventilation in spa pool cabinet.
Page 1
OPERATING INSTRUCTIONS:
The Intuitive Series heat pump and control system has been designed so that
the pool can be automatically operated maintaining predetermined heat and
filtering operations. An in built clock puts the system into a sleep mode when
absolute quiet is needed.
Fig 1: Control box
with analogue
time clock
