Hardware Setup
17
PS/2 Mouse Conn. – PS/2 Mouse Connector
Attach 6-pin male PS/2 mouse cable to this connector to enable PS/2
mouse function.
PS/2 Mouse Connector
Pin Assignment
GND
DATA
N/A
VCC
CLOCK
N/A
PRT – Parallel Port Connector
Attach parallel port cable to this connector.
J18 — Speaker Connector
Attach a 4-pin case-mounted speaker to this connector.
USB1 – Universal Serial Bus Connectors
Attach 9-pin USB cable to these connectors for external USB device.
JP45 – Wake-On-Lan (WOL) Header
Attach a 3-pin connector from the LAN card which supports the Wake-
On-Lan (WOL) function. This function lets users wake up the connected
computer through the LAN card. (The cable should be included with the
LAN card.)
JP45 Pin Assignment
1
2
3
5V
GND
SENSOR
