10
Hardware Setup
COM1/COM2 Connectors
Connect COM1/COM2 devices to these connectors.
FDC Connector
Attach floppy cable to this connector.
PRT – Parallel Port Connector
Attach parallel port cable to this connector.
USB1/USB2 – Universal Serial Bus Connector
Attach USB cable to these connectors for external USB device.
CPU FA, CHA FA: CPU Cooling Fan Connectors
These 3-pins connectors provide 12V power for the CPU, and chasis
cooling fans which match the pin assignment of these connectors. If you
enable the Suspend Mode function in BIOS setup, these fans will stop
when the system is into the suspend mode.
CPU FA, CHA FA Cooling
Fan Connectors
(Pin Assignment)
GND
12V
Sensor
1
2
3
Note: Make sure the pin assignment of our CPU Cooling Fan is matched
with this connector before connecting it, otherwise, you may
damage either the mainboard or the cooling fan.
