36
BIOS Setup
KB POWER On Password
If you selected password from the item
above, you can set your password
through this item.
Hot Key Power On
If you select ÒHot KeyÓ from the item
above, you will have to choose a key
combination that will wake up the
system here. Choose from Ctrl-F1 to
Ctrl-F12.
Onboard FDC Controller
Enabled Ð Use the on-board floppy
controller (default).
Disabled Ð Turn off the on-board floppy
controller.
Onboard Serial Port 1/
Onboard Serial Port 2
Choose serial port 1 & 2Õs I/O address.
Do no set port 1 & 2 to the same value
except for Disabled. Choose Auto for
automatic setting for the I/O address and
IRQ.
COM1/3F8H
COM3/3E8H
COM2/2F8H
COM4/2E8H
(default)
UR2 Mode Select
Choose Standard (default), IrDA 1.0,
ASK IR, MIR0.57M, MIR1.15M, or FIR
to meet the specification of your Infra
Red device.
UR2 Duplex Mode
Choose Half (default) or Fall. Ask your
IR provider when you use this function.
Onboard Parallel Port
Choose the parallel port I/O address:
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5, or Disabled to disable this
port.
Parallel Port Mode
Choose
ECP+EPP, SPP
(default),
EPP
,
or
ECP.
The mode depends on your
external device that connects to this port.
ECP Mode Use DMA
Choose
DMA3
or
DMA1
. This setting
only works when the Onboard Printer
Mode is set at the ECP mode.
