Sovema FC-2 180 Скачать руководство пользователя страница 35

OPERATION & MAINTENANCE MANUAL 

              page 33                                                              Release 2017

Sovema S.r.l.

Via Olmo 6/10
41013 Gaggio In Piano (MO)
ITALY
Tel: 0039 (0)59 93 85 85
Fax: 0039 (0)59 93 85 12
e-mail: [email protected]
www.sovema.com

WARRANTY REGISTRATION

This warranty will become valid only if this form is completed and signed by both the Purchaser and the Deal-
er and is returned 

within 8 days of purchase date

!

IF NOT WARRANTY IS INVALID.

FILL OUT

 

TYPE OF IMPLEMENT

: _________________________________

 

SERIAL NUMBER

: _________________________________

 

DATE OF PURCHASE

: _________________________________

CUSTOMER’S COPY

DEALER: I HEREBY CERTIFY THAT:

The machine has been correctly assembled in
accordance with the manufacturers instructions.

All nuts and bolts, oil level and grease have been
checked.

All safety guards and warning stickers have been
placed on machine.

PTO has been matched to tractor and greased.

All    other    pre-delivery    checks    have    been
completed as per operators manual.

The purchaser   was   given   operators   manual   
and instructed in safe and correct usage of machine 
and on limitation of warranty.

The machine was tested and operates correctly. 

PURCHASER: I HEREBY ACCEPT:

That the machine is correctly assembled.

Receipt of the operators manual which I have read
and have clearly understood.

To have a clear understanding of the warranty
limitations.

To have a clear understanding of the correct and
safe operation of the machine.

That the machine need regular maintenance as
instructions in operators manual.

To have clear understanding on the capacity of this
machine and made aware of its limitations.

                                (Address) 

 

       ___________________________________ 
 
       ___________________________________ 
 
       ___________________________________ 
            Date:                                     Signature: 
 

                              (Address) 

 

       ___________________________________ 
 
       ___________________________________ 
 
       ___________________________________ 
            Date:                                     Signature: 

Содержание FC-2 180








































Отзывы: