Sovema FC-2 180 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 39

Sovema FC-2 180 Скачать руководство пользователя страница 3

OPERATION & MAINTENANCE MANUAL Revision 2017

Dear Owner,

Thank you for buying a SOVEMA manufactured product.

Your new machine has been carefully designed and manufactured to give you superior
performance and dependable service, if properly operated and maintained.

You will find this machine to be steady and reliable when matched to the suggested
horsepower operating range.

Much time has been invested in providing safety and protection. Please carefully read
this manual. It tells you how to safely and easily assemble, operate and maintain your
machine.

Be sure that you and any other operator carefully follow the recommended safety
practices at all times. Failure to do so could result in personal injury or property damage.

Of course, should you ever have any problems or questions, please contact your local
SOVEMA dealer or contact us at the addresses or numbers indicated in this manual.

SOVEMA manufactures a variety of innovative equipment. If you are interested in
discovering our entire range, please contact us.

Thanks for your choice.

Pier Silvio Mayer
President

«
1
2
3
4
5
...
»

Содержание FC-2 180








































Отзывы:

Нет отзывов