OPERATION & MAINTENANCE MANUAL
Revision 2022
_____________________________________________________________________________________
II - 5/6
The rotating parts of the implement have been designed and tested for rugged
use. However they can damage due to impact with heavy solid objects. Such
impact can cause fragments to be thrown outward at very high speed. To reduce
the possibility of serious injury, or even death, never allow the rotating parts to go
to the contact with such obstacles
Stop the implement and tractor immediately upon hitting an obstacle. Turn off the
engine, remove the ignition key, inspect and repair any damage before resuming
operation
No repairs or adjustments should be carried out while the implement is connected
to the tractor and turned on
Disengage tractor PTO and place transmission into neutral position before
attempting to start tractor engine
USE AFTER A LONG PERIOD OF INACTIVITY
Before using the implement after a long period of inactivity, please follow these steps:
Make sure the implement is not damaged
Check all mechanical parts. They must be in good condition and must not show
signs of rust
Check wear of tools
Verify that the implement does not present loss of oil from couplings or tubes
Lubricate all moving parts
Verify that all safety guards are correctly positioned and assembled
Verify that all safety decals are correctly positioned and assembled
ROAD TRANSPORT SAFETY
Plan route to avoid heavy traffic
Make sure that all moving parts be firmly secured
Be sure that the implement is in the raised position for transport
When you drive never drink
Pay attention to traffic when operating near or crossing roadways
Drive at low speed to avoid bouncing and loss of steering control
Before transportation, remove any dirt, soil, crop residue or other elements that
might be dangerously dispersed during transport
