OPERATION & MAINTENANCE MANUAL
Revision 2022
_____________________________________________________________________________________
V - 1/4
V – MAINTENANCE
The efficiency and lifetime of this implement strongly depend on the observance of its
maintenance schedule. The schedule reported below is subject to change since it refers to
a normal usage and does not take into consideration heavier working conditions which
require a more frequent maintenance.
Disengage the PTO drive shaft before proceeding with maintenance
In order to lift the implement up please use the free hole on the top link of the
three-point hitch
Figure 1
EVERY 10 WORKING HOURS
Check if the bolts that fix the tines to the rotors are tightened well (see Fig. 1). Tighten as
needed.
Grease the PTO drive shaft components
Clean the end of PTO shaft with non toxic/non inflammable detergent
Make sure that PTO shaft guard is in place and in good condition
bolts
