5
When the operation handle is placed in area B or area C, the truck can conduct traveling operation
as well as lifting operation. However, traveling and lifting operation can not realized at the same time, with the
traveling operation as the preferential function
。
⑷
Operation control:
1)
Lifting and lowering operation: Press the lowering button of the forks, the forks will descend. While the
lifting button is pressed, the fork will rise
。
1
．
Lifting button 2. Lowering button 3. Accelerator knob
4. Emergency reverse button 5. Horn 6. Slow-down button
2)
Accelerator knob: It is used to control the travel direction and speed of the electric truck. Before
operation of the truck, firstly turn the operation handle to area C shown as above. When the handle is
placed in area A, the truck will be powered-off and braked. At this time, the truck can not drive. When the
operation handle is placed in area C and the acceleration knob is turned in one direction, the truck will
travel in that direction. Meanwhile the truck will be accelerated with the increasing of rotation amplitude
of the knob. When the
accelerator knob is turned in
another direction, the truck will
travel in another direction.
Likewise
，
the truck will speed
up with the increasing of
rotation amplitude of the knob.
3)
Horn button
：
Horn of the
truck will be turned on if you
press the button
。
4)
Emergency reverse button:
when the operation handle is
placed in area B and the
emergency reverse button is
pressed, the truck will travel in an opposite direction away from the operator immediately. This is a safety
switch which can avoid the operator from being squeezed under unexpected condition
。
5)
Slow-down button: When this button is pressed, the truck will travel at an extremely slow speed. This
button is applicable for operation on especially narrow field or on the condition that the truck needs to be
accurately located.
。
6)
Electric lock
：
It is used to control switching-on and switching-off of main power supply of the truck. Key
of the electric lock shall be kept by the truck driver or personnel who have been specially assigned. Be
sure to cut off the main power supply when you leave the truck, and take the key of electric lock, for fear
occurrence of accident due to operation carried out by others
。
7)
Power switch
：
It is used to control emergency power-off of the truck. Pulling up the switch, then main
power supply will be cut off, and inserting down represents switching-on. If your truck were out of
control due to some reason, please immediately pull up the switch to cut off power supply for sake of any
occurrence of accident
。
As for the operation button on operation handle and handrail control case, the same buttons
have the same control function, which is convenient for easy operation
。
1.
Horn
button
2.
Rise
button
3.Tortoise
climb button
4.Descend
button
5.battery
main switch
