51
The road vehicle (trailer) and rail vehicle should endure the overall weight of vehicle, load and
the drivers. It is necessary to inspect if the pavement is crushing, having holes or other
damage.
When the industrial truck is operating at high place or platform, should not use the industrial
truck to move other vehicles. Never open the door of the rail truck using industrial truck;
expect for equipped with special device and the driver has passed the train to use the device.
14.2 Applied to the driver
The safety operating of the industrial truck lies on the control manner of the driver ro a
considerable degree. The safety rules applied to the drives are as follows:
A
）
general rule;
B
）
transporting (lifting and stacking) rule;
C
）
operating (driving) rule;
D
）
the rule for the driver maintaining the truck.
Without regard to the rules maybe conduce:
A
）
the serious danger of damaging the driver or other personnel;
B
）
Damage the materials.
14.2.1 General rule
Only the personnel who have been trained and get the qualification of operation are permitted
to drive the industrial truck.
The motor industrial vehicle could not carry passengers, except for equipped with the facility
for the passengers sitting.
The driver should pay special attention to the operating circumstance, including the person
nearby other staves and fixed or moving substances, and it is necessary to watch out for the
passerby at any moment.
No matter whether there is load on the lifting part of the truck, it is forbidden anyone passing
or standing under the lifting part of the truck.
If the people, building, organization or equipment accident happens, it is necessary to report
to the relevant officer at once.
The driver should not change, add or demolish the truck components without the permission
to
influence the performance of the truck .It is not allowed to install accessorial frame or
handle on the steering wheel ,except the factory has installed it.
The driver should use the truck in the using range. When operating high stacking job, convey
high and multi-piece piled goods using driving type high-lift truck, it is necessary to use the
truck with blind goods shelf and canopy guard shelf.
Exception: if there is no danger of the load fall down on the driver, the truck without blind
goods shelf can be used.
When operating high stacking job, convey high and multi-piece piled goods using walking type
truck, the blind goods shelf is necessary.
14.2.2 Load carriage (lifting and stacking) rule
14.2.2.1 Load
The industrial truck or the combination of the industrial truck and attachment only can convey
the load not over its rated load weight. The capacity of the industrial truck with attachment
maybe less than the one marked on the nameplate.
Any measure of enhancing the capacity of the truck is forbidden, for example the adding
people or balance weight.
In any conditions, especially when using the attachment, it is necessary to pay attention to the
operation, location, fixation and transportation of the load. The truck with attachment when
unloaded should be treated as with some capacity.
Only the rank stabilized or safety load can be conveyed, especially when convey the super long
or high load, should pay special care.
When convey the load which center of gravity is uncertain, operating the vehicle should special
carefully.
14.2.2.2 The loading and unloading of goods.
When loading the goods with forks:
A
）
The space between the forks should fit the width of the conveying load.
B
）
The fork should insert into the inner of the load as deep as possible. But pay attention to
not make the fork tip touch the substance except the load. Then the fork should lift to the
enough height to move the goods.
