17
Southworth Products
PalletPal 360 Manual
5.2 Transporting the Machine
This machine may be moved while loaded. If moving while loaded,
secure the load to the platform before moving. Unsecured loads may fall
and cause death or serious injury.
Carefully insert the forks into the fork pockets on the base frame. Carefully raise the machine off
of the floor and transport the machine to the desired location. Carefully lower the machine onto the
floor and remove the forks from the fork pockets.
6. Maintenance & Repair
Do not enter under the platform unless the platform is secured against
lowering.
Remove load before performing any maintenance.
All inspections may be performed with the springs installed. Springs
must be removed before performing any repair requiring disassembly of
the leg assembly.
6.1 Periodic Maintenance
Before each use inspect the machine for damage or wear. If damage or wear is found remove the
machine from service and repair before using.
6.1.1. Weekly
• Inspect upper and lower rollers, roller pins and bushings, and roller tracks. Replace as
necessary.
• Inspect upper and lower hinge pins and bushings. Replace as necessary.
• Inspect motion stabilizer for signs of leaking and/or damage. Replace as necessary.
• Inspect center pins and bushings. Replace as necessary.
• Inspect rotator ring, rotator ring washer, and bearings. Ensure the rotator rings rotates
smoothly without binding. Repair or replace bearings as necessary.
• Inspect base frame, platform, and leg set for wear or damage.
6.1.2. Every Six Months
• Perform weekly maintenance
• Apply PTFE lubricant to all pivot points, rollers, and bearings.
