background image

13

Southworth Products

PalletPal 360 Manual

4.4    Spring Selection

Spring configurations are chosen to operate best within a specific load weight/height range. If 

the load height and/or weight changes, a different spring configuration may be needed. See the 

Spring Selection Chart

 for springs required for the specific ranges. If necessary, additional 

springs may be ordered. Contact customer service for more information.

Range 0 machines are not supplied with an orange spring. Instead, one 

white spring is supplied. This spring is installed at the factory and the 

machine is shipped in the raised position. No further setup is required.

4.4.1.  Spring Selection Chart

In order to make sure your PalletPal functions properly you must have the proper spring 

configuration. This simple chart below will allow you to pick the right spring configuration for your 

application based on the weight of your pallet load and the height of your pallet load.
PalletPal springs are precisely calibrated and will work best within the load weight and height 

ranges selected. Selection based on higher or lower than actual weight will result in restricted 

raising or lowering capability. Should pallet weight or height weight requirements dramatically 

change, PalletPal can be adapted in the field at any time by simply changing the spring 

combination used.

0-400 

lb.

0-180 

kg

400 

-800 

lb.

80-360 

kg

800 

-1200 

lb.

360-540 

kg

1200 

-1600 

lb.

540-720 

kg

1600 

-2000 

lb.

720-900 

kg

2000 

-2400 

lb.

900-1080 

kg

2400 

–2800 

lb.

1080-1260 

kg

2800 

–3200 

lb.

1260-1440 

kg

32003600 

lb.

1440-1620 

kg

3600 

–4000 

lb.

1620-1800 

kg

4000 

-4500 

lb.

1800-2025 

kg

0

Range 0 White Spring 

Only

58-60 in.

1473-1524 mm

0

0

1

1

1

1

2

2

2

3

3

56-58 in.

1422-1473 mm

0

0

1

1

1

2

2

2

2

3

3

1

Range 1 Orange Spring 

Only

54-56 in.

1372-1422 mm

0

0

1

1

1

2

2

2

2

3

3

52-54 in.

1321-1372 mm

0

1

1

1

1

2

2

2

3

3

3

2

Range 2 Orange & Gray 

Springs

50-52 in.

1270-1321 mm

0

1

1

1

1

2

2

2

3

3

4

48-50 in.

1219-1270 mm

0

1

1

1

1

2

2

2

3

3

4

3

Range 3 - Orange & 

Purple Springs

46-48 in.

1168-1219 mm

0

1

1

1

1

2

2

3

3

3

4

44-46 in.

1118-1168 mm

0

1

1

1

2

2

3

3

3

4

4

4

Range 4 Orange, Gray, & 

Purple Springs

42-44 in.

1067-1118 mm

0

1

1

2

2

2

3

3

4

4

4

40-42 in.

1016-1067 mm

0

1

1

2

2

3

3

3

4

4

4

38-40 in.

965-1016 mm

0

1

1

2

2

3

3

4

4

4

4

36-38 in.

914-965 mm

0

1

1

2

2

3

4

4

4

4

4

34-36 in.

864-914 mm

1

1

2

2

3

3

4

4

4

4

---

32-34 in.

813-864 mm

1

1

2

3

3

4

4

4

4

---

---

30-32 in.

762-813 mm

1

1

2

3

3

4

4

4

4

---

---

Weight of Fully Loaded Pallet

Height 

of 

Fully 

Loaded 

Pallet

Содержание PalletPal 360





















Отзывы: