22
Southworth Products
DDL Dock Lift Manual
Before raising or lowering, raise throw-over plate(s) to avoid damaging them.
BEFORE PERSONNEL MAY
RIDE ON LIFT
MUST BE SECURED
ALL FLEXIBLE RESTRAINTS
THROW OVER PLATE
MUST BE IN RAISED
POSITION BEFORE
RAISING OR LOWERING
THE PLATFORM
ALL HANDRAILS MUST BE
INSTALLED AND SECURED
BEFORE PERSONNEL MAY
RIDE ON LIFT
To raise the machine,
press and hold the UP button on the controls. Release the button when
the platform is at the desired height.
To lower the machine,
press and hold the DOWN button on the controls. Release the button
when the platform is at the desired height.
5.1
Loading
The Center of Gravity (CG) of all loads must be centered on the platform when lift is in motion.
Uneven loading can lead to excessive wear and premature failure. Any regular, uneven loading
must be offset by a counterweight installed on the opposite side of the platform. The combined
load must not exceed the rated capacity.
Do not load or unload the lift table while moving.
Loads that may shift must be secured before operating.
Do not exceed maximum load capacity of lift table.
