5
Symbols Used on LCD Display
V Volts
A Amps
AC Alternating current
DC Direct current
- Minus sign
£6OTZ
•))) Continuity
Diode test
F Farads (capacitance)
Hz Hertz (frequency)
% Percent (duty ratio)
(<;6
Autoranging
Battery status
n nano (10
-9
)
µ micro (10
-6
)
m milli (10
-3
)
k kilo (10
3
)
M mega (10
6
)
63
6]LYSVHK
6
Operation
AC/DC Voltage Measurements
1. Set the rotary function switch to the
V Hz%
position.
2. Press the
button to select AC or DC
voltage.
3. Connect the test leads in parallel to the
circuit under test. For DC measurements
touch the red test probe to the positive side
of the circuit and the black test probe to the
negative side of the current.
4. Read the voltage on the LCD display
AC/DC Current Measurements
Observe all safety precautions when working on live voltages.
Do not measure current on circuits that exceed 500 V.
WARNINGS:
Observe all safety
precautions when working on live voltages.
WARNING:
Hz%
MODE
®
V
MODE
1. For current measurements up to 200mA AC/DC,
set the rotary function switch to the
mA
position.
2. For current measurements up to 4000µA AC/DC,
set the rotary function switch to the
µA
position.
3. Press the
button to select AC or DC current.
4. Remove power from the circuit under test,
then open up the circuit at the point where
you wish to measure current.
5. Touch the test probe tips in series with the
circuit being measured. For DC current,
touch the black test probe to the negative
side of the circuit and touch the red test
probe to the positive side of the circuit.
6. Apply power to the circuit.
7. Read the current on the LCD display.
NOTE:
0.2A/500V fast acting Resettable Fuse on mA and µA ranges.
No replacement required.
MODE
Hz%
MODE
®