Southwest Windpower Whisper 100, Руководство пользователя, Страница: 29 / 42

Whisper 100 Owners Manual Document #0211 REV C
SOUTHWEST WINDPOWER 10/05/05 2626 26
Maintenance
3. INSPECT THE TOWER
Follow all inspection and maintenance requirements of the
tower manufacturer. Tighten all nuts and bolts, especially
wire clips. Check for cracks and bent or broken parts at
the anchors and base structure. Check for broken strands
and tighten guys.
2. CHECK MECHANICAL CONDITION
WATCH AND LISTEN FROM THE TOWER BASE.
Use binoculars. There should be no mechanical noise,
rattle or vibration. The propeller and tail must not wobble.
Lower or climb the tower for inspection, if indicated.
There should be no buzzing either heard or felt with your
hand on the tower mast. Go to Electrical Problems, if
indicated.
1. TEST DIVERSION CONTROL
(This checks electrical wiring.)
DIVERT THE LOAD (BY SETTING THE DIVERSION
SWITCH TO “STOP”) IN A MODERATE WIND
(CHARGING BUT NOT FURLING). No unusual
difficulty or noise should be experienced in stopping the
propeller. A noise during diversion can indicate a
disconnected wire.
4. CHECK THE BATTERY
Add only distilled water if needed. (Consult your battery
manufacturer guide.)
Tighten battery connections
Remove corrosion and protect terminals
Wipe tops with baking soda solution.
Whisper Controller
14. Maintenance - Monthly