background image

 

 

Page III 

The Quality Name in High Voltage Switching 

 

LIMITED WARRANTY 

 

Southern States, LLC (“SSLLC”) warrants only to the Warranty Holder (hereinafter defined as the “End 

User” or the “Immediate Purchaser”, as applicable, pursuant to the terms and conditions of this Limited 

Warranty as set forth below), that the Product identified below will, upon shipment, be free of defects in 

workmanship and material for the applicable Warranty Period. The “Warranty Period” is that period of time 

during which this Limited Warranty is effective, and such period begins on the invoice date issued by SSLLC 

for the Product, and continues until the earlier to occur of (1) the expiration of the Warranty Duration period, 

or (2) the Number of Operations, both as specified in the table below. If the Product is both purchased and 

installed within the United States or Canada, this Limited Warranty is granted to each end user of the 

Product who acquired the Product for its own use during the Warranty Period (“End User”). In all other 

situations, this Limited Warranty is granted only to the first purchaser of the Product (“Immediate Purchaser”) 

from SSLLC. No primary or remote purchaser or owner of the Product who is not a Warranty Holder may 

claim any benefit under this Limited Warranty, or any remedial promise included in this Limited Warranty. 

SSLLC shall, upon prompt written notice from the Warranty Holder, correct a nonconforming Product by 

repair or replacement at the sole discretion of SSLLC  of the nonconforming Product or any part or 

component of a nonconforming Product necessary in SSLLC’s discretion to make such Product conforming. 

Any transportation charges, labor for removing, reinstalling the Product or part, and/or costs related to 

providing access to the Product shall be the responsibility of the Warranty Holder. Correction in this manner 

will constitute the Warranty Holder’s exclusive remedy and fulfillment of all SSLLC’s liabilities and 

responsibilities hereunder. SSLLC’s duty to perform under this limited warranty may be delayed, at SSLLC’s 

sole option, until SSLLC has been paid in full for all products purchased by the Warranty Holder. No such 

delay will extend the Warranty Period. If SSLLC does not make such repair or replacement, SSLLC’s liability 

for damages on account of any claimed nonconformity will in no event exceed the purchase price of the 

Product in question. This Limited Warranty does not apply to any Product that has been disassembled, 

repaired, or altered by anyone other than SSLLC. This Limited Warranty will not apply to any Product that 

has been subjected to improper or abnormal use of the Product. SSLLC has no responsibility to repair or 

replace any Product or component thereof manufactured by another party, but SSLLC will assign, to the 

extent assignable, to the Warranty Holder any manufacturers’ warranty that applies to products and 

components not manufactured by SSLLC.   

 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES. 

THERE ARE NO OTHER EXPRESS, IMPLIED, OR STATUTORY WARRANTIES. ALL IMPLIED 

WARRANTIES WHICH MAY ARISE BY IMPLICATION OF LAW, OR APPLICATION OF 

COURSE OF DEALING OR USAGE OF TRADE, INCLUDING, BUT NOT LIMITED TO, IMPLIED 

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, 

NONINFRINGEMENT OR OTHERWISE ARE EXPRESSLY EXCLUDED. SSLLC SHALL NOT 

BE LIABLE OR RESPONSIBLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, 

EXEMPLARY, SPECIAL, OR PUNITIVE DAMAGES, EVEN IF SSLLC HAS BEEN ADVISED OF 

THE POSSIBILITY OF SAME. THE WARRANTY HOLDER IS SOLELY RESPONSIBLE FOR 

THE SUITABILITY OF THE PRODUCT FOR ANY PARTICULAR APPLICATION.   

Product Purchased 

Region 

Product Installed 

Region 

Warranty Holder 

Warranty Duration 

U.S and Canada 

U.S and Canada 

End User 

Five (5) Years 

All Other Conditions 

Immediate 

Purchaser 

Earlier of 1 year from 

installation or 18 months 

from shipment 

 

 

Содержание EC-2V

































Отзывы: