INSTALLATION
MODEL NO. MRA-60
DIAGRAM FOR MOUNTING BROILER
TO 60 ¾ " CAFE RANGE RISER NO. MRK-30
NOTE: Most 60%" riser and broiler assemblies are shipped from the factory preassembled to the range. If not, however, follow
the mounting method depicted in the diagram. The following instructions should then be followed to mount a broiler to an
MRK-30, 60%" riser assembly.
1. Determine method of gas piping before mounting broiler "A." (See instructions on Page 3, Section 1.)
2. Lift broiler "A" with broiler hook "B" installed. Place hook over broiler hanger, line up holes and fasten with (3) slotted
hex head sheet metal screws.
3. Fasten bottom of broiler "B" to riser with (2) slotted hex head sheet metal screws provided (one each side). Screws are
located on underside of broiler "B" as shown.
4. To install Bottom Cover "Z":
A. Remove (4) slotted hex head sheet metal screws (2 each side) that fasten body side retainer "F" (not body front).
B. Position bottom cover "C" above flanges as shown in View "Z-Z" and reinstall (4) screws.
COMPACT INFRA-RED BROILER
SECTION ONE — INSTALLATION
PAGE 11
