INSTALLATION
MODEL NO. MRA-36
DIAGRAM FOR MOUNTING BROILER
TO 36" CAFE RANGE RISER NO. MRC-36
1. Fasten broiler hook "A" to rear of broiler "B" with (3) slotted hex head sheet metal screws provided.
2. Prepare gas supply connection before mounting broiler "B." (See instructions on Page 3, Section 1.)
3. Lift broiler "B" with broiler hook "A" installed. Place hook over broiler hanger, line up holes and fasten
with (3) slotted hex head sheet metal screws provided.
4. Fasten bottom of broiler "B" to riser with (2) slotted hex head sheet metal screws provided (one each side).
Screws are located on underside of broiler "B" as shown.
5. To install Bottom Cover "Z":
A. Remove (4) slotted hex head sheet metal screws (2 each side) that fasten body side retainer "F" (not body
front).
B. Position bottom cover "C" above flanges as shown in View "Z -Z" and reinstall (4) screws.
COMPACT INFRA.RED BROILER
SECTION ONE — INSTALLATION
PAGE 10
Litho U.S.A.
Rev 7-91
